En español
El Departamento Energía Solar (DES) de la Comisión Nacional de Energía Atómica (CNEA) ha trabajado en el desarrollo y fabricación de sensores de radiación solar desde la década del 90, con aplicaciones tanto terrestres como espaciales. En el DES se elaboran y caracterizan sensores solares de silicio cristalino buscando modificar y adecuar su respuesta espectral en la región del ultravioleta (UV) con la finalidad de utilizarlos como instrumentos de bajo costo para medir dicha radiación. Para que el radiómetro funcione como un sensor de radiación UV, es necesario la utilización de un filtro óptico que recorte la región del espectro solar que no se desea sensar. En este trabajo se muestra el diseño de filtros con películas delgadas dieléctricas y metálicas considerando varios materiales y diferentes espesores de capas. Se realizaron simulaciones numéricas para obtener la transmitancia de los filtros que permitan medir bandas estrechas específicas del espectro UV.
En inglés
The Department of Solar Energy (DES) of the National Atomic Energy Commission (CNEA) has been working on the development and manufacture of solar radiation sensors since the 1990s, for both terrestrial and space applications. In the DES, crystalline silicon solar sensors are developed and characterized in order to modify and adapt their spectral response in the ultraviolet (UV) region to be used as low cost instruments to measure this radiation. For the radiometer to function as a UV radiation sensor, it is necessary to applay an optical filter that cuts out the region of the solar spectrum that is not desired to be sensed. This paper presents the design of filters with thin dielectric and metallic films considering different materials and different layer thicknesses. Numerical simulations were performed to obtain the transmittance of the filters that allows the measurement of narrow bands within the UV spectrum.