<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:dc="http://purl.org/dc/elements/1.1/" version="2.0">
<channel>
<title>Publicaciones CETMIC</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/103974</link>
<description/>
<pubDate>Mon, 16 Nov 2026 16:09:45 GMT</pubDate>
<dc:date>2026-11-16T16:09:45Z</dc:date>
<item>
<title>Propiedades tecnológicas de un agregado cerámico liviano (ACL) comercial nacional</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/200325</link>
<description>Articulo
Technological properties of national commercial lightweight expanded clay aggregate (LECA)
VI Jornada de Intercambio y Difusión de los Resultados de Investigaciones de los Doctorandos en Ingeniería (UTN, 4 y 5 de octubre de 2022); AJEA; no. 15
El presente trabajo representa una primera aproximación a las propiedades de un agregado cerámico liviano (ACL) nacional que se encuentra en el mercado local. Se estudiaron 5 grupos de agregados, clasificados en base a su color y morfología. Se tomaron imágenes digitales con LUPA del interior de los ACL para describir la microestructura. Se determinó la textura y se identificaron las fases mineralógicas desarrollados a causa del proceso de sinterizado. Los resultados obtenidos permitieron definir estrategias preliminares de selección de la materia prima, optimización del proceso de conformado y sinterizado para la fabricación de ACL con características homogéneas y que atiendan a las necesidades de diversas aplicaciones como uso civil y en tecnologías ambientales, confirmando la pertinencia de las estrategias de caracterización llevadas adelante.; This work is a first approaching to the properties of a national commercial lightweight expanded clay aggregate (LECA). Five groups of aggregates were studied, the classification was based on their color and morphology. Some digital images of the LECA were taken to describe the microstructure. Moreover, the texture was determinated and the mineralogical phases developed because of the sintering process were identified. The results obtained allow defining strategies in the selection of the raw material, the improvement of conformed and the sintering process in order to obtain LECA with homogeneous characteristics that attend the needs of a variety of applications, such as civil use and environmental technology. Furthermore, these results confirm the importance of the characterization strategies carried out.
</description>
<pubDate>Sat, 01 Jan 2022 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/200325</guid>
<dc:date>2022-01-01T00:00:00Z</dc:date>
<dc:description>El presente trabajo representa una primera aproximación a las propiedades de un agregado cerámico liviano (ACL) nacional que se encuentra en el mercado local. Se estudiaron 5 grupos de agregados, clasificados en base a su color y morfología. Se tomaron imágenes digitales con LUPA del interior de los ACL para describir la microestructura. Se determinó la textura y se identificaron las fases mineralógicas desarrollados a causa del proceso de sinterizado. Los resultados obtenidos permitieron definir estrategias preliminares de selección de la materia prima, optimización del proceso de conformado y sinterizado para la fabricación de ACL con características homogéneas y que atiendan a las necesidades de diversas aplicaciones como uso civil y en tecnologías ambientales, confirmando la pertinencia de las estrategias de caracterización llevadas adelante.

This work is a first approaching to the properties of a national commercial lightweight expanded clay aggregate (LECA). Five groups of aggregates were studied, the classification was based on their color and morphology. Some digital images of the LECA were taken to describe the microstructure. Moreover, the texture was determinated and the mineralogical phases developed because of the sintering process were identified. The results obtained allow defining strategies in the selection of the raw material, the improvement of conformed and the sintering process in order to obtain LECA with homogeneous characteristics that attend the needs of a variety of applications, such as civil use and environmental technology. Furthermore, these results confirm the importance of the characterization strategies carried out.</dc:description>
</item>
<item>
<title>Mechanochemical stabilization and sintering of nanocrystalline (ZrO₂)₀.₉₇ (Y₂O₃)₀.₀₃ solid solution from pure oxides</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/199101</link>
<description>Articulo
IOP Conference Series: Materials Science and Engineering; vol. 18, no. 6
The mechanochemical activation processing has proved to be an effective technique to enhance a solid-state reaction at relatively low temperatures. In such a process, the mechanical effects of milling, such as reduction of particle size and mixture homogenization, are accompanied by chemical effects, such as partial decomposition of salts or hydroxides resulting in very active reactants. The objective of the present work is to obtain (ZrO2)0.97(Y203)0.03 nanocrystalline tetragonal solid solution powders directly using a high energy milling on a mixture of the pure oxides. A second objective is to evaluate the efficiency of the processing proposed and to characterize both textural and structural evolution of the mixtures during the milling processes and throughout posterior low temperature treatments.&#13;
The Textural and structural evolution were studied by XRD analysis, specific area measurements (BET) and SEM. Firstly a decrease of the crystallinity of the reactants was observed, followed by the disappearance of Y2O3 diffraction peaks and the partial appearance of the tetragonal phase at room temperature. The solid solution proportion was increased with the high energy milling time, obtaining complete stabilization of the tetragonal solid solution with long milling treatments (60 min).The obtained powders were uniaxially pressed and sintered at different temperatures (600-1400ºC); the influence of the milling time was correlated with the sinterization degree and final crystalline composition of the materials.&#13;
Finally, fully stabilized nanocrystalline zirconia materials were obtained satisfactorily by the proposed method.
</description>
<pubDate>Sat, 01 Jan 2011 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/199101</guid>
<dc:date>2011-01-01T00:00:00Z</dc:date>
<dc:description>The mechanochemical activation processing has proved to be an effective technique to enhance a solid-state reaction at relatively low temperatures. In such a process, the mechanical effects of milling, such as reduction of particle size and mixture homogenization, are accompanied by chemical effects, such as partial decomposition of salts or hydroxides resulting in very active reactants. The objective of the present work is to obtain (ZrO2)0.97(Y203)0.03 nanocrystalline tetragonal solid solution powders directly using a high energy milling on a mixture of the pure oxides. A second objective is to evaluate the efficiency of the processing proposed and to characterize both textural and structural evolution of the mixtures during the milling processes and throughout posterior low temperature treatments.&#13;
The Textural and structural evolution were studied by XRD analysis, specific area measurements (BET) and SEM. Firstly a decrease of the crystallinity of the reactants was observed, followed by the disappearance of Y2O3 diffraction peaks and the partial appearance of the tetragonal phase at room temperature. The solid solution proportion was increased with the high energy milling time, obtaining complete stabilization of the tetragonal solid solution with long milling treatments (60 min).The obtained powders were uniaxially pressed and sintered at different temperatures (600-1400ºC); the influence of the milling time was correlated with the sinterization degree and final crystalline composition of the materials.&#13;
Finally, fully stabilized nanocrystalline zirconia materials were obtained satisfactorily by the proposed method.</dc:description>
</item>
<item>
<title>Dawsonite in tuffs and litharenites of the Cerro Castaño member, Cerro Barcino Formation, Chubut Group (Cenomanian), Los Altares, Patagonia, Argentina</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/199099</link>
<description>Articulo
The Canadian Mineralogist; vol. 49, no. 2
Dawsonite, NaAlCO₃(OH)₂, occurs as a replacement, cement, and fracture filling in continental, zeolitized and silicified vitric tuffs and litharenites of the Cenomanian Cerro Castaño Member, Cerro Barcino Formation, Chubut Group, Patagonia, Argentina. Analcime is the only associated zeolite; it replaces the vitric masses and also fills fractures and cavities. Dawsonite and analcime display an inverse ratio. Textural relationships indicate that dawsonite is a pseudomorph after oligoclase, quartz, vitric shards, and vitric masses; it coexists with diagenetic quartz cement and postdates analcime, calcite, and hematite cements. Unaltered crystals of high sanidine postdate all other cements generated. Silicification of the tuffs is likely to have occurred in various stages during the diagenetic history of the sequence. Hypabyssal bodies of alkaline basic rocks of the El Buitre – El Canquel Formation, which intruded regionally the Cerro Castaño Member during Eocene time, are interpreted to be responsible for the introduction of CO₂ gas at high partial pressures, together with sodium, which led to dawsonite formation. Diagenetic quartz, at a late stage of silicification, is related to the transformation of oligoclase and analcime to dawsonite, also releasing Na and Ca into the system. The d13C (PDB) values of dawsonite, in the range –1.2 to –2.4‰, attest to alkaline igneous activity in the Cerro Castaño Member during the Eocene and, in addition, set a limit on the age of the dawsonite.
</description>
<pubDate>Sat, 01 Jan 2011 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/199099</guid>
<dc:date>2011-01-01T00:00:00Z</dc:date>
<dc:description>Dawsonite, NaAlCO₃(OH)₂, occurs as a replacement, cement, and fracture filling in continental, zeolitized and silicified vitric tuffs and litharenites of the Cenomanian Cerro Castaño Member, Cerro Barcino Formation, Chubut Group, Patagonia, Argentina. Analcime is the only associated zeolite; it replaces the vitric masses and also fills fractures and cavities. Dawsonite and analcime display an inverse ratio. Textural relationships indicate that dawsonite is a pseudomorph after oligoclase, quartz, vitric shards, and vitric masses; it coexists with diagenetic quartz cement and postdates analcime, calcite, and hematite cements. Unaltered crystals of high sanidine postdate all other cements generated. Silicification of the tuffs is likely to have occurred in various stages during the diagenetic history of the sequence. Hypabyssal bodies of alkaline basic rocks of the El Buitre – El Canquel Formation, which intruded regionally the Cerro Castaño Member during Eocene time, are interpreted to be responsible for the introduction of CO₂ gas at high partial pressures, together with sodium, which led to dawsonite formation. Diagenetic quartz, at a late stage of silicification, is related to the transformation of oligoclase and analcime to dawsonite, also releasing Na and Ca into the system. The d13C (PDB) values of dawsonite, in the range –1.2 to –2.4‰, attest to alkaline igneous activity in the Cerro Castaño Member during the Eocene and, in addition, set a limit on the age of the dawsonite.</dc:description>
</item>
<item>
<title>Synthesis, structure and magnetic properties of distorted YxLa1−xFeO3: effects of mechanochemical activation and composition</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/199097</link>
<description>Articulo
Materials Chemistry and Physics; vol. 130, no. 3
The influence of mechanochemical treatment on the synthesis and properties of YxLa1−xFeO3 (0 ≤ x ≤ 1) orthoferrites is studied. Solid mixtures of the corresponding metal oxides were treated in a high-energy ball-mill. X-ray diffraction revealed that during the milling the disappearance of the reactants and a fast conversion to orthoferrite phase take place. Magnetic measurements showed a weak ferromagnetic behavior of the obtained materials, observing higher magnetization for larger x. The activated powders heated at 600 and 800 ◦C showed a progressive crystalline ordering together with a significant drop of magnetization. Thermal treatments at 1000 ◦C produced the formation of the phase Y3Fe5O12 for the samples richer in yttrium, increasing the magnetization. Rietveld refinements of the diffraction patterns and dynamical scanning calorimetry were used respectively to determine the lattice parameters and Néel temperatures for the formed orthoferrites. The effect of the composition on the structure and magnetic behavior is discussed.
</description>
<pubDate>Sat, 01 Jan 2011 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/199097</guid>
<dc:date>2011-01-01T00:00:00Z</dc:date>
<dc:description>The influence of mechanochemical treatment on the synthesis and properties of YxLa1−xFeO3 (0 ≤ x ≤ 1) orthoferrites is studied. Solid mixtures of the corresponding metal oxides were treated in a high-energy ball-mill. X-ray diffraction revealed that during the milling the disappearance of the reactants and a fast conversion to orthoferrite phase take place. Magnetic measurements showed a weak ferromagnetic behavior of the obtained materials, observing higher magnetization for larger x. The activated powders heated at 600 and 800 ◦C showed a progressive crystalline ordering together with a significant drop of magnetization. Thermal treatments at 1000 ◦C produced the formation of the phase Y3Fe5O12 for the samples richer in yttrium, increasing the magnetization. Rietveld refinements of the diffraction patterns and dynamical scanning calorimetry were used respectively to determine the lattice parameters and Néel temperatures for the formed orthoferrites. The effect of the composition on the structure and magnetic behavior is discussed.</dc:description>
</item>
<item>
<title>Sintering, microstructure and hardness of Y-TZP- 64S bioglass ceramics</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/199091</link>
<description>Articulo
Ceramics International; vol. 44, no. 5
3 mol% yttria-partially stabilized zirconia (Y-TZP) powder and a sol-gel derived CaO- P2O5- SiO2 (64S) bioglass, were used to produce Y-TZP- 64S slip cast compacts. The compacts with 10.5 and 19.9 vol% 64S were sintered at different temperatures up to 1500 °C using 5 and 10 °C/min heating/cooling rates. The densification behaviour, crystalline phase formation and zirconia grain growth were investigated as a function of sintering temperature and 64S glass content. Ca3(PO4)2 along with SiO2 as a major phase were obtained from thermal decomposition of the 64S glass at 950–1500 °C. Both 64S additions, 10.5 and 19.9 vol%, promoted the sintering process at a lower temperature with respect to Y-TZP (1500 °C); the SiO2 phase markedly increased the Y-TZP solid state sintering rate at the intermediate stage. The rapidly cooling at 10 °C/min inhibited the t-m transformation of Y-TZP and markedly reduced that of Y-TZP- 64S at 1300–1500 °C. Sintered Y-TZP with 10.5 vol% 64S, nearly fully densified at 1300–1400 °C, was constituted by polygonal ZrSiO4 particles and elongated Ca2P2O7 particles uniformly distributed in the tetragonal zirconia fine grain matrix. This ceramic exhibited similar hardness to that of Y-TZP sintered at 1500 °C; the in situ formation of calcium phosphate will have the potential to improve the Y-TZP biological properties without significantly affecting its hardness.
</description>
<pubDate>Mon, 01 Jan 2018 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/199091</guid>
<dc:date>2018-01-01T00:00:00Z</dc:date>
<dc:description>3 mol% yttria-partially stabilized zirconia (Y-TZP) powder and a sol-gel derived CaO- P2O5- SiO2 (64S) bioglass, were used to produce Y-TZP- 64S slip cast compacts. The compacts with 10.5 and 19.9 vol% 64S were sintered at different temperatures up to 1500 °C using 5 and 10 °C/min heating/cooling rates. The densification behaviour, crystalline phase formation and zirconia grain growth were investigated as a function of sintering temperature and 64S glass content. Ca3(PO4)2 along with SiO2 as a major phase were obtained from thermal decomposition of the 64S glass at 950–1500 °C. Both 64S additions, 10.5 and 19.9 vol%, promoted the sintering process at a lower temperature with respect to Y-TZP (1500 °C); the SiO2 phase markedly increased the Y-TZP solid state sintering rate at the intermediate stage. The rapidly cooling at 10 °C/min inhibited the t-m transformation of Y-TZP and markedly reduced that of Y-TZP- 64S at 1300–1500 °C. Sintered Y-TZP with 10.5 vol% 64S, nearly fully densified at 1300–1400 °C, was constituted by polygonal ZrSiO4 particles and elongated Ca2P2O7 particles uniformly distributed in the tetragonal zirconia fine grain matrix. This ceramic exhibited similar hardness to that of Y-TZP sintered at 1500 °C; the in situ formation of calcium phosphate will have the potential to improve the Y-TZP biological properties without significantly affecting its hardness.</dc:description>
</item>
<item>
<title>Volcanic ash as flux in clay based triaxial ceramic materials, effect of the firing temperature in phases and mechanical properties</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/199086</link>
<description>Articulo
Ceramics International; vol. 41, no. 5
The study of possible incorporation of nontraditional starting powders is a contribution to the rational utilization of raw materials in the ceramic industry. The technological properties of solid waste problems (both urban and industrial) in many cases are not correctly studied and reported.&#13;
The main objective of the present work is to study and demonstrate the applicability of the volcanic ash for the fabrication of clay based ceramic materials as the flux fraction for replacing feldspar. This paper deals with a particular raw material (volcanic ash) but the results can be extended to materials resulting from similar sources and properties. The milled volcanic ash was characterized and employed as a flux agent replacing feldspar in a model triaxial ceramic material (clay–quartz–flux) formulation. Previously, the volcanic ash was characterized. Differential Thermal Analysis and termogravimetry (DTA–TG) in order to establish the firing conditions were also carried out. Afterwards, the thermal treatments (900–1300 1C) conditions were studied: the firing temperatures were correlated with the shrinkage–porosity–density evolution.&#13;
The crystalline phase thermal evolution was also established and compared to the one observed in the model feldspar based material. Finally the mechanical properties of the obtained materials (flexural strength and dynamic elastic modulus) were evaluated. The results permitted to corroborate the applicability and establish some of the technological properties of ash based ceramic material.
</description>
<pubDate>Thu, 01 Jan 2015 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/199086</guid>
<dc:date>2015-01-01T00:00:00Z</dc:date>
<dc:description>The study of possible incorporation of nontraditional starting powders is a contribution to the rational utilization of raw materials in the ceramic industry. The technological properties of solid waste problems (both urban and industrial) in many cases are not correctly studied and reported.&#13;
The main objective of the present work is to study and demonstrate the applicability of the volcanic ash for the fabrication of clay based ceramic materials as the flux fraction for replacing feldspar. This paper deals with a particular raw material (volcanic ash) but the results can be extended to materials resulting from similar sources and properties. The milled volcanic ash was characterized and employed as a flux agent replacing feldspar in a model triaxial ceramic material (clay–quartz–flux) formulation. Previously, the volcanic ash was characterized. Differential Thermal Analysis and termogravimetry (DTA–TG) in order to establish the firing conditions were also carried out. Afterwards, the thermal treatments (900–1300 1C) conditions were studied: the firing temperatures were correlated with the shrinkage–porosity–density evolution.&#13;
The crystalline phase thermal evolution was also established and compared to the one observed in the model feldspar based material. Finally the mechanical properties of the obtained materials (flexural strength and dynamic elastic modulus) were evaluated. The results permitted to corroborate the applicability and establish some of the technological properties of ash based ceramic material.</dc:description>
</item>
<item>
<title>Mechanical and fracture properties of zircon–mullite composites obtained by direct sintering</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/198909</link>
<description>Articulo
Ceramics International; vol. 35, no. 7
Refractory materials based on zircon (ZrSiO₄) are applied in high temperature applications (1400–1500 8C). They are demonstrated to have an excellent chemical attack resistance, such as corrosion or degradation due to molten glass or metals. On the other hand mullite (3Al₂O₃ 2SiO₂) is important both in traditional and advanced ceramics. Although multi-phase ceramic materials were always used, nowadays composite materials have an important industrial and technological development, to enlarge the designing capability of the manufacturer in properties and behaviors.&#13;
The objective of the present work is to study the influence of the starting composition on the mechanical and fracture properties of zircon–mullite composites obtained by direct sintering of consolidated samples by slip cast of concentrated aqueous suspensions in plaster molds. Zircon–mullite composites using 15–45 wt% mullite were prepared and compared with pure zircon material obtained in the same conditions. Flexural strength (sf), dynamic elastic modulus (E), toughness (KIC) and initiation fracture surface energy (gNBT) were evaluated. The results were explained by microstructure and the XRD analysis. The presence of mullite increased the zircon thermal dissociation. The ZrO₂ was a product of this reaction and also influence the mechanical and fracture properties of these materials through several combined mechanisms.&#13;
Zircon composites prepared with 45 wt% of mullite in the starting powder showed a higher fracture toughness and initiation energy than ceramics derived from pure zircon. Microstructure consisting in mullite as a continuous predominant phase in which zircon and zirconia grains were distributed improved almost all the mechanical and fracture properties.
</description>
<pubDate>Thu, 01 Jan 2009 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/198909</guid>
<dc:date>2009-01-01T00:00:00Z</dc:date>
<dc:description>Refractory materials based on zircon (ZrSiO₄) are applied in high temperature applications (1400–1500 8C). They are demonstrated to have an excellent chemical attack resistance, such as corrosion or degradation due to molten glass or metals. On the other hand mullite (3Al₂O₃ 2SiO₂) is important both in traditional and advanced ceramics. Although multi-phase ceramic materials were always used, nowadays composite materials have an important industrial and technological development, to enlarge the designing capability of the manufacturer in properties and behaviors.&#13;
The objective of the present work is to study the influence of the starting composition on the mechanical and fracture properties of zircon–mullite composites obtained by direct sintering of consolidated samples by slip cast of concentrated aqueous suspensions in plaster molds. Zircon–mullite composites using 15–45 wt% mullite were prepared and compared with pure zircon material obtained in the same conditions. Flexural strength (sf), dynamic elastic modulus (E), toughness (KIC) and initiation fracture surface energy (gNBT) were evaluated. The results were explained by microstructure and the XRD analysis. The presence of mullite increased the zircon thermal dissociation. The ZrO₂ was a product of this reaction and also influence the mechanical and fracture properties of these materials through several combined mechanisms.&#13;
Zircon composites prepared with 45 wt% of mullite in the starting powder showed a higher fracture toughness and initiation energy than ceramics derived from pure zircon. Microstructure consisting in mullite as a continuous predominant phase in which zircon and zirconia grains were distributed improved almost all the mechanical and fracture properties.</dc:description>
</item>
<item>
<title>Study of nanoconfigurations in Zircon-Mullite composites using perturbed angular correlations</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/198906</link>
<description>Articulo
Hyperfine Interactions; vol. 198, no. 1-3
It has been already published that, at nanoscopic level, zircon exhibits wide regions of aperiodic material not detected by the ordinary techniques used to analyse the obtained product in the production of ceramic materials. In this paper it is reported how the Perturbed Angular Correlations (PAC) technique has assisted the interpretation of a mismatch between experiment and theoretical estimation of a mechanical property in some zircon-mullite composites. In fact, it has been proved that the difference observed between the calculated and the experimental value of the elastic modulus in composites of the form (1−x) ZrSiO₄ − x 3Al₂O₃.2SiO₂ (with x = 15, 25, 35 and 45 wt.%) behaves very similarly as the relative amount of aperiodic zircon determined by PAC. This result allows to re-interpret the mullite role during the materials preparation.
</description>
<pubDate>Fri, 01 Jan 2010 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/198906</guid>
<dc:date>2010-01-01T00:00:00Z</dc:date>
<dc:description>It has been already published that, at nanoscopic level, zircon exhibits wide regions of aperiodic material not detected by the ordinary techniques used to analyse the obtained product in the production of ceramic materials. In this paper it is reported how the Perturbed Angular Correlations (PAC) technique has assisted the interpretation of a mismatch between experiment and theoretical estimation of a mechanical property in some zircon-mullite composites. In fact, it has been proved that the difference observed between the calculated and the experimental value of the elastic modulus in composites of the form (1−x) ZrSiO₄ − x 3Al₂O₃.2SiO₂ (with x = 15, 25, 35 and 45 wt.%) behaves very similarly as the relative amount of aperiodic zircon determined by PAC. This result allows to re-interpret the mullite role during the materials preparation.</dc:description>
</item>
<item>
<title>Agregados livianos a partir de lutita y aserrín</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/194975</link>
<description>Articulo
Revista Hormigón; no. 65
La creciente conciencia medioambiental y el desarrollo de economías sostenibles han incrementado el interés en el uso de hormigones livianos y térmicamente aislantes. El amplio stock de lutitas proveniente del destape de las canteras de caliza (Olavarría, Buenos Aires) es una materia prima potencialmente viable para elaborar agregados livianos y generar una alternativa con valor agregado. El objetivo de este trabajo es evaluar la eficacia del aserrín, residuo de la industria maderera, como agente formador de poros para obtener agregados livianos a diferentes temperaturas de sinterizado, cuando se utiliza una lutita como principal materia prima. Los resultados obtenidos demostraron que el aserrín es un adecuado agente formador de poros para obtener agregados livianos, mejorando la porosidad obtenida respecto a los agregados elaborados únicamente con lutita. Se logró la sinterización de agregados livianos con un interior negro poroso, corteza rojiza y propiedades similares a un agregado liviano comercial.; The growing environmental awareness and the development of sustainable economies have increased interest in using lightweight and thermally insulating concrete. The large shale stock extracted from the upper layers in limestone quarries (Olavarría, Buenos Aires) is a potentially viable raw material to produce lightweight aggregates and generate an added-value alternative. This work aims to evaluate the effectiveness of sawdust, a waste from the wood industry, as a pore-forming agent to obtain lightweight aggregates at different sintering temperatures when shale is the primary raw material. The results demonstrated that sawdust is a suitable pore-forming agent for obtaining lightweight aggregates, improving the porosity compared to aggregates made only with shale. Lightweight aggregates with a porous black core, red cortex and properties similar to a commercial lightweight aggregate were successfully sintered.
</description>
<pubDate>Thu, 01 Aug 2024 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/194975</guid>
<dc:date>2024-08-01T00:00:00Z</dc:date>
<dc:description>La creciente conciencia medioambiental y el desarrollo de economías sostenibles han incrementado el interés en el uso de hormigones livianos y térmicamente aislantes. El amplio stock de lutitas proveniente del destape de las canteras de caliza (Olavarría, Buenos Aires) es una materia prima potencialmente viable para elaborar agregados livianos y generar una alternativa con valor agregado. El objetivo de este trabajo es evaluar la eficacia del aserrín, residuo de la industria maderera, como agente formador de poros para obtener agregados livianos a diferentes temperaturas de sinterizado, cuando se utiliza una lutita como principal materia prima. Los resultados obtenidos demostraron que el aserrín es un adecuado agente formador de poros para obtener agregados livianos, mejorando la porosidad obtenida respecto a los agregados elaborados únicamente con lutita. Se logró la sinterización de agregados livianos con un interior negro poroso, corteza rojiza y propiedades similares a un agregado liviano comercial.

The growing environmental awareness and the development of sustainable economies have increased interest in using lightweight and thermally insulating concrete. The large shale stock extracted from the upper layers in limestone quarries (Olavarría, Buenos Aires) is a potentially viable raw material to produce lightweight aggregates and generate an added-value alternative. This work aims to evaluate the effectiveness of sawdust, a waste from the wood industry, as a pore-forming agent to obtain lightweight aggregates at different sintering temperatures when shale is the primary raw material. The results demonstrated that sawdust is a suitable pore-forming agent for obtaining lightweight aggregates, improving the porosity compared to aggregates made only with shale. Lightweight aggregates with a porous black core, red cortex and properties similar to a commercial lightweight aggregate were successfully sintered.</dc:description>
</item>
<item>
<title>Aserrín como agente formador de poros en la obtención de agregados livianos</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/194531</link>
<description>Objeto de conferencia
III Jornadas de Jóvenes Investigadores en Tecnología del Cemento y el Hormigón (JJI TCH 2023) (Bahía Blanca, 2 y 3 de noviembre de 2023); 3º edición de la Jornada de Jóvenes Investigadores en Tecnología del Hormigón y  el Cemento: actuales investigaciones en tecnología del cemento y el hormigón  en Argentina
La industria de los agregados es la mayor proveedora de materias primas para la construcción. Los requisitos anuales de agregados en el mercado mundial de la construcción alcanzaron los 55 mil millones de toneladas en 2020 y podría llegar a duplicarse en la próxima década. La escasez de agregados naturales será un problema en un futuro próximo. Además, la creciente conciencia medioambiental y el desarrollo de economías sostenibles han incrementado el interés en el uso de hormigones livianos. La utilización de agregados livianos en la elaboración de placas, baldosas y hormigones mejora su capacidad de aislación térmica y acústica, a la vez que implica un menor consumo de energía durante su manipulación, debido a la menor densidad obtenida. Las arcillas naturalmente disponibles tienen un enorme potencial para ser utilizadas como materia prima para agregados livianos artificiales. En la región de Olavarría se cuenta con amplios depósitos de lutitas, que contienen los minerales arcillosos illita y clorita, como descarte proveniente del destape de canteras de calizas. El agregado liviano artificial consiste en pequeñas esferas con una corteza, generalmente densa y poco permeable, que contienen un interior poroso. La porosidad del agregado dependerá de la materia prima y del tratamiento térmico: es fundamental lograr la formación de una capa exterior con la viscosidad adecuada para retener los gases generados a partir de la deshidroxilación de los minerales arcillosos, o mediante la descomposición de otra especie. En este sentido existe la posibilidad de incorporar un agente formador de poros proveniente de residuos de diversas industrias, como por ejemplo aserrín, para favorecer la generación de gases. El objetivo de este trabajo es evaluar la eficacia del aserrín como agente formador de poros para obtener agregados livianos a diferentes temperaturas de sinterizado, cuando se utiliza lutita como materia prima.
</description>
<pubDate>Sun, 01 Jan 2023 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/194531</guid>
<dc:date>2023-01-01T00:00:00Z</dc:date>
<dc:description>La industria de los agregados es la mayor proveedora de materias primas para la construcción. Los requisitos anuales de agregados en el mercado mundial de la construcción alcanzaron los 55 mil millones de toneladas en 2020 y podría llegar a duplicarse en la próxima década. La escasez de agregados naturales será un problema en un futuro próximo. Además, la creciente conciencia medioambiental y el desarrollo de economías sostenibles han incrementado el interés en el uso de hormigones livianos. La utilización de agregados livianos en la elaboración de placas, baldosas y hormigones mejora su capacidad de aislación térmica y acústica, a la vez que implica un menor consumo de energía durante su manipulación, debido a la menor densidad obtenida. Las arcillas naturalmente disponibles tienen un enorme potencial para ser utilizadas como materia prima para agregados livianos artificiales. En la región de Olavarría se cuenta con amplios depósitos de lutitas, que contienen los minerales arcillosos illita y clorita, como descarte proveniente del destape de canteras de calizas. El agregado liviano artificial consiste en pequeñas esferas con una corteza, generalmente densa y poco permeable, que contienen un interior poroso. La porosidad del agregado dependerá de la materia prima y del tratamiento térmico: es fundamental lograr la formación de una capa exterior con la viscosidad adecuada para retener los gases generados a partir de la deshidroxilación de los minerales arcillosos, o mediante la descomposición de otra especie. En este sentido existe la posibilidad de incorporar un agente formador de poros proveniente de residuos de diversas industrias, como por ejemplo aserrín, para favorecer la generación de gases. El objetivo de este trabajo es evaluar la eficacia del aserrín como agente formador de poros para obtener agregados livianos a diferentes temperaturas de sinterizado, cuando se utiliza lutita como materia prima.</dc:description>
</item>
<item>
<title>Concreciones dolomíticas de la formación Quintuco en la localidad de Puerta Curaco, cuenca Neuquén, Argentina</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/190847</link>
<description>Objeto de conferencia
Dolomitic concretions in the Quintuco Formation, Puerta Curaco Section, Neuquén Basin, Argentina
XX Congreso Geológico Argentino (San Miguel de Tucumán, 7 al 11 de agosto de 2017)
La parte basal de la Formación Quintuco en el perfil de Puerta Curaco está caracterizada por la presencia de bancos dolomíticos tabulares de alrededor de 0,40 m de espesor que ocasionalmente contienen concreciones subesféricas de hasta 1 m de diámetro. Allí, la Formación Quintuco se inicia con intercalaciones de pelitas negras laminadas, calizas y wackstones dolomitizados, litofacies que fueron recientemente interpretadas como depósitos de offshore a zona de transición inferior, pertenecientes a una plataforma mixta carbonática-siliciclástica (Kietzmann et al. 2016). Los wackestones dolomitizados se encuentran dentro de una sucesión de calizas, margas y pelitas con abundante materia orgánica, que constituyen la litología dominante, en un intervalo de alrededor de 70 m de espesor en la parte inferior de la citada unidad. La mineralogía y geoquímica (elementos mayoritarios, traza e isótopos estables de C y O) de los bancos tabulares y de las concreciones ha sido estudiada en detalle y permiten inferir el origen de las mismas. Las dolomías tabulares están formadas principalmente por dolomita férrica de grano fino. Se originaron por precipitación diagenética y reemplazo de las calizas en la zona de metanogénesis y corresponden a la categoría de sedimentos formados en márgenes continentales ricos en materia orgánica y corresponden al tipo de "poca dolomita" de Baker y Bums (1985). Las concreciones presentan estructuras brechosas de tipo septario. La litología original de la concreción, probablemente calcita, fue reemplazada por dolomita de grano fino, generando la disminución del volumen interno y el brechamiento de la roca. Los septos son de dolomita espática en cristales grandes de hasta 1 cm de diámetro. Asimismo, minerales tales como calcita, celestina, estroncianita y cuarzo aparecen como las fases minerales que precipitaron en último lugar, ya sea reemplazando a la dolomita espática o rellenando espacios vacíos, de algunos cm a pocos dm de diámetro, dentro de las concreciones. El análisis de los isótopos estables de C y O revela que la fracción dolomítica de las concreciones también se originó en la zona de metagenesis, pero que la dolomita de los septos y los minerales de Sr se originaron posteriormente durante etapas más avanzadas de la diagénesis. El Sr fue probablemente aportado por la recristalización de las calizas durante la diagénesis avanzada. La precipitación de cuarzo y calcita en forma de drusas sería un evento que tuvo lugar luego de la contracción sufrida por la roca al producirse el reemplazo de la calcita original por dolomita.; The basal part of the Quintuco Formation at the Puerta Curaco section is characterized by tabular dolomite beds about 0.4 m thick, which occasionally contain sub-spherical concretions up to 1 m in diameter. There, the Quintuco Formation starts with black, laminated shales, limestones and dolomitized wackestones, lithofacies recently interpreted as deposited in offshore to lower transition environments in a mixed carbonatic-siliciclastic shelf (Kietzmann et al.&#13;
2016). The dolomitized wackestones are found within a succession of limestones, marls, and organic-rich shales, the dominant background lithology for an interval about 70 m thick in the lowermost part of the unit. Detailed mineralogical and geochemical studies (main and trace elements, C and O stable isotopes) in beds and concretions allow inferring the origin of the dolomitic rocks. Fine-grained ferrous dolomite is the main mineral in the tabular dolomite beds. They were formed by diagenetic precipitation and replacement of limestones in the methanogenesis diagenetic zone and correspond to the "dolomite poor" type of Baker and Burns (1985) for organic-rich continental margin sediments. The concretions show a septarian brecciated structure. The original calcite from the concretion was replaced by fine-grained dolomite, producing contraction and brecciation of the rock. Septa are built of spathic dolomite with individual crystals up to 1 cm of diameter. Calcite, celestine, strontianite and quartz are mineral phases that precipitated later, replacing spathic dolomite or filling empty spaces, several cm to a few dm in diameter, within the concretions. C and O stable isotope analysis reveal that the dolomite in the concretions also originated in the methanogenesis diagenetic zone. The calcite in septa and the Sr minerals, however, were originated later. The Sr was probably sourced by the recrystallization of the limestones in more advanced diagenetic stages. Drusic quartz and calcite are the result of precipitation after the contractional stage of the concretion caused by the replacement of calcite by dolomite.
</description>
<pubDate>Sun, 01 Jan 2017 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/190847</guid>
<dc:date>2017-01-01T00:00:00Z</dc:date>
<dc:description>La parte basal de la Formación Quintuco en el perfil de Puerta Curaco está caracterizada por la presencia de bancos dolomíticos tabulares de alrededor de 0,40 m de espesor que ocasionalmente contienen concreciones subesféricas de hasta 1 m de diámetro. Allí, la Formación Quintuco se inicia con intercalaciones de pelitas negras laminadas, calizas y wackstones dolomitizados, litofacies que fueron recientemente interpretadas como depósitos de offshore a zona de transición inferior, pertenecientes a una plataforma mixta carbonática-siliciclástica (Kietzmann et al. 2016). Los wackestones dolomitizados se encuentran dentro de una sucesión de calizas, margas y pelitas con abundante materia orgánica, que constituyen la litología dominante, en un intervalo de alrededor de 70 m de espesor en la parte inferior de la citada unidad. La mineralogía y geoquímica (elementos mayoritarios, traza e isótopos estables de C y O) de los bancos tabulares y de las concreciones ha sido estudiada en detalle y permiten inferir el origen de las mismas. Las dolomías tabulares están formadas principalmente por dolomita férrica de grano fino. Se originaron por precipitación diagenética y reemplazo de las calizas en la zona de metanogénesis y corresponden a la categoría de sedimentos formados en márgenes continentales ricos en materia orgánica y corresponden al tipo de "poca dolomita" de Baker y Bums (1985). Las concreciones presentan estructuras brechosas de tipo septario. La litología original de la concreción, probablemente calcita, fue reemplazada por dolomita de grano fino, generando la disminución del volumen interno y el brechamiento de la roca. Los septos son de dolomita espática en cristales grandes de hasta 1 cm de diámetro. Asimismo, minerales tales como calcita, celestina, estroncianita y cuarzo aparecen como las fases minerales que precipitaron en último lugar, ya sea reemplazando a la dolomita espática o rellenando espacios vacíos, de algunos cm a pocos dm de diámetro, dentro de las concreciones. El análisis de los isótopos estables de C y O revela que la fracción dolomítica de las concreciones también se originó en la zona de metagenesis, pero que la dolomita de los septos y los minerales de Sr se originaron posteriormente durante etapas más avanzadas de la diagénesis. El Sr fue probablemente aportado por la recristalización de las calizas durante la diagénesis avanzada. La precipitación de cuarzo y calcita en forma de drusas sería un evento que tuvo lugar luego de la contracción sufrida por la roca al producirse el reemplazo de la calcita original por dolomita.

The basal part of the Quintuco Formation at the Puerta Curaco section is characterized by tabular dolomite beds about 0.4 m thick, which occasionally contain sub-spherical concretions up to 1 m in diameter. There, the Quintuco Formation starts with black, laminated shales, limestones and dolomitized wackestones, lithofacies recently interpreted as deposited in offshore to lower transition environments in a mixed carbonatic-siliciclastic shelf (Kietzmann et al.&#13;
2016). The dolomitized wackestones are found within a succession of limestones, marls, and organic-rich shales, the dominant background lithology for an interval about 70 m thick in the lowermost part of the unit. Detailed mineralogical and geochemical studies (main and trace elements, C and O stable isotopes) in beds and concretions allow inferring the origin of the dolomitic rocks. Fine-grained ferrous dolomite is the main mineral in the tabular dolomite beds. They were formed by diagenetic precipitation and replacement of limestones in the methanogenesis diagenetic zone and correspond to the "dolomite poor" type of Baker and Burns (1985) for organic-rich continental margin sediments. The concretions show a septarian brecciated structure. The original calcite from the concretion was replaced by fine-grained dolomite, producing contraction and brecciation of the rock. Septa are built of spathic dolomite with individual crystals up to 1 cm of diameter. Calcite, celestine, strontianite and quartz are mineral phases that precipitated later, replacing spathic dolomite or filling empty spaces, several cm to a few dm in diameter, within the concretions. C and O stable isotope analysis reveal that the dolomite in the concretions also originated in the methanogenesis diagenetic zone. The calcite in septa and the Sr minerals, however, were originated later. The Sr was probably sourced by the recrystallization of the limestones in more advanced diagenetic stages. Drusic quartz and calcite are the result of precipitation after the contractional stage of the concretion caused by the replacement of calcite by dolomite.</dc:description>
</item>
<item>
<title>The Balcarce formation: stratigraphy and ichnology in a gondwanian framework</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/190771</link>
<description>Objeto de conferencia
La Formación Balcarce: estratigrafia e icnología en el contexto gondwánico
XX Congreso Geológico Argentino (San Miguel de Tucumán, 7 al 11 de agosto de 2017)
La Formación Balcarce presenta una serie de cuestiones estratigráficas que permanecen no resueltas, tanto referidas a su definición como a la correlación con unidades de África. El análisis de información composicional, relaciones de campo y paleocorrientes permitiría descartar la ausencia de una discontinuidad entre las diamictitas himantianas y las clásicas ortocuarcitas de la unidad. Por otra parte la correlación tradicional con el Subgrupo Nardow es discutida, dada las notables diferencias litológicas, de espesor y el contenido icnológico que permiten extender la misma a la Formación Skurwerberg y dado los registros icnológicos de esta última restringirlas al Silúrico inferior. Por otra parte, se discute la correlación de la unidad en estudio con la Formación Port Sthepens de Malvinas/Falkland y se sugiere la correlación con el Miembro Albemarle al mismo tiempo que se descarta la correlación entre el mismo y los subsiguientes con el Nardouw Group. Esto se fundamenta en que las razones para explicar la diferencia de espesores, la localización de facies marinas y el registro icnológico que sugiere incursiones marinas no explican la correlación aceptada hasta el presente. De esta manera, La Formación Balcarce no superaría el Silúrico inferior, al igual que gran parte de la Formación Port Stephens y de esta manera existiría la ausencia de registro sedimentario del Silúrico tardío en África, Ventana, Tandilia y Malvinas. Estas interpretaciones se encuentran directamente ligadas a discusiones tectónicas de enorme actualidad. Por otra parte, los rasgos observados en la Formación Balcarce enfatizan la procedencia detrítica desde el Este-Noreste y permiten descartar aportes secundarios desde la Precordillera como ha sido sugerido.
</description>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/190771</guid>
<dc:description>La Formación Balcarce presenta una serie de cuestiones estratigráficas que permanecen no resueltas, tanto referidas a su definición como a la correlación con unidades de África. El análisis de información composicional, relaciones de campo y paleocorrientes permitiría descartar la ausencia de una discontinuidad entre las diamictitas himantianas y las clásicas ortocuarcitas de la unidad. Por otra parte la correlación tradicional con el Subgrupo Nardow es discutida, dada las notables diferencias litológicas, de espesor y el contenido icnológico que permiten extender la misma a la Formación Skurwerberg y dado los registros icnológicos de esta última restringirlas al Silúrico inferior. Por otra parte, se discute la correlación de la unidad en estudio con la Formación Port Sthepens de Malvinas/Falkland y se sugiere la correlación con el Miembro Albemarle al mismo tiempo que se descarta la correlación entre el mismo y los subsiguientes con el Nardouw Group. Esto se fundamenta en que las razones para explicar la diferencia de espesores, la localización de facies marinas y el registro icnológico que sugiere incursiones marinas no explican la correlación aceptada hasta el presente. De esta manera, La Formación Balcarce no superaría el Silúrico inferior, al igual que gran parte de la Formación Port Stephens y de esta manera existiría la ausencia de registro sedimentario del Silúrico tardío en África, Ventana, Tandilia y Malvinas. Estas interpretaciones se encuentran directamente ligadas a discusiones tectónicas de enorme actualidad. Por otra parte, los rasgos observados en la Formación Balcarce enfatizan la procedencia detrítica desde el Este-Noreste y permiten descartar aportes secundarios desde la Precordillera como ha sido sugerido.</dc:description>
</item>
<item>
<title>Zeolitas sintetizadas a partir de vidio volcánico en medio alcalino</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/190510</link>
<description>Objeto de conferencia
Zeolites synthesized from volcanic glass in alcaline medium
XX Congreso Geológico Argentino (San Miguel de Tucumán, 7 al 11 de agosto de 2017)
In this work, synthesis studies were performed using a partially zeolitized vitreous tuff (rich in mordenite) from the province of Mendoza, with 0.1, 0.5 and 1 N NaOH solutions at 40 and 95ºC. The process was monitored by X-ray diffraction and scanning electron microscopy. Experiences showed that the material can be homogenized improving its crystallinity, transforming the relict glass and mordenite into a Na-P zeolite of phillipsite-Na family (Na5,7Al5,7Si 10,3O32.12H2O) with subordinate analcime and probable chabazite. The reaction evolution was more effective and fast at 95ºC in 1 N NaOH solution.
</description>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/190510</guid>
<dc:description>In this work, synthesis studies were performed using a partially zeolitized vitreous tuff (rich in mordenite) from the province of Mendoza, with 0.1, 0.5 and 1 N NaOH solutions at 40 and 95ºC. The process was monitored by X-ray diffraction and scanning electron microscopy. Experiences showed that the material can be homogenized improving its crystallinity, transforming the relict glass and mordenite into a Na-P zeolite of phillipsite-Na family (Na5,7Al5,7Si 10,3O32.12H2O) with subordinate analcime and probable chabazite. The reaction evolution was more effective and fast at 95ºC in 1 N NaOH solution.</dc:description>
</item>
<item>
<title>Analisis mineralógico del sistema Vaca Muerta-Quintuco en un marco estratigráfico secuencial: sección Puerta Curaco, cuenca neuquina</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/190509</link>
<description>Objeto de conferencia
Mineralogical analysis of Vaca Muerta - Quintuco system on a stratigraphic framework: Puerta Curaco section, Neuquén basin
XX Congreso Geológico Argentino (San Miguel de Tucumán, 7 al 11 de agosto de 2017)
El sistema Vaca Muerta - Quintuco (Tithoniano - Valanginiano) aflora en la sección de Puerta Curaco con un espesor de 716 metros. La Formación Vaca Muerta se encuentra constituida por una alternancia regular de margas y calizas, con ocasionales niveles de tobas y se interpreta como una rampa carbonática. Por otro lado, la Formación Quintuco presenta un tramo basal con alternancia de pelitas, pelitas calcáreas y calizas/dolomitas, mientras que el tramo superior se encuentra constituido por una alternancia de pelitas y areniscas finas, interpretándose como una plataforma mixta. Se reconocieron cinco secuencias depositacionales de tercer orden y se definieron tres argilofacies a partir de estudios de DRX. La argilofacies A se constituye esencialmente por material illítico, la B presenta material illítico y clorita como mineral secundario y la C se constituye por illita/mica, clorita e interestratificados illita / esmectita (1/S).; The Vaca Muerta-Quintuco system (Tithonian-Valanginian) crops out at the Puerta Curaco section, with a thickness of 716 meters. The Vaca Muerta Formation consists on regularly intercalated marlstones and limestones, with occasionally interbedded tuffs and it has been interpreted as a carbonate ramp. The Quintuco Formation consists on a basal section of shales, limestones and dolomites, while the upper section is constituted of shales and fine-grained sandstones. The Quintuco Formation has been interpreted as a mixed carbonate-siliciclastic shelf. Five composite depositional sequences (third order) and three argillaceous facies were defined on the basis of XRD analysis. Argillaceous facies A is essentially formed by illitic material, argillaceous facies B is formed by illi - tic material and chlorite as a secondary mineral and argillaceous facies C is formed by illite/mica, chlorite and in - terstratified illite/ smectite (1/S).
</description>
<pubDate>Sun, 01 Jan 2017 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/190509</guid>
<dc:date>2017-01-01T00:00:00Z</dc:date>
<dc:description>El sistema Vaca Muerta - Quintuco (Tithoniano - Valanginiano) aflora en la sección de Puerta Curaco con un espesor de 716 metros. La Formación Vaca Muerta se encuentra constituida por una alternancia regular de margas y calizas, con ocasionales niveles de tobas y se interpreta como una rampa carbonática. Por otro lado, la Formación Quintuco presenta un tramo basal con alternancia de pelitas, pelitas calcáreas y calizas/dolomitas, mientras que el tramo superior se encuentra constituido por una alternancia de pelitas y areniscas finas, interpretándose como una plataforma mixta. Se reconocieron cinco secuencias depositacionales de tercer orden y se definieron tres argilofacies a partir de estudios de DRX. La argilofacies A se constituye esencialmente por material illítico, la B presenta material illítico y clorita como mineral secundario y la C se constituye por illita/mica, clorita e interestratificados illita / esmectita (1/S).

The Vaca Muerta-Quintuco system (Tithonian-Valanginian) crops out at the Puerta Curaco section, with a thickness of 716 meters. The Vaca Muerta Formation consists on regularly intercalated marlstones and limestones, with occasionally interbedded tuffs and it has been interpreted as a carbonate ramp. The Quintuco Formation consists on a basal section of shales, limestones and dolomites, while the upper section is constituted of shales and fine-grained sandstones. The Quintuco Formation has been interpreted as a mixed carbonate-siliciclastic shelf. Five composite depositional sequences (third order) and three argillaceous facies were defined on the basis of XRD analysis. Argillaceous facies A is essentially formed by illitic material, argillaceous facies B is formed by illi - tic material and chlorite as a secondary mineral and argillaceous facies C is formed by illite/mica, chlorite and in - terstratified illite/ smectite (1/S).</dc:description>
</item>
<item>
<title>Susbtrate and oxygen conditions and their role in the preservation of the first record of articulated ophiuroids for the mesozoic of South America: Preliminary results</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/190351</link>
<description>Objeto de conferencia
Las condiciones de sustrato y oxígeno y su rol en la preservación del primer registro de Ojiuroideos Articula - dos del Mesozoico en Sudamérica: resultados preliminares
XX Congreso Geológico Argentino (San Miguel de Tucumán, 7 al 11 de agosto de 2017)
Recientemente, se halló el primer registro de ofiuroideos articulados del Mesozoico de Sudamérica en Cuenca Neuquina. Aquí, se interpreta su paleoambiente depositacional como rampa externa de baja energía por debajo de la base de olas de tormenta, asociado a un periodo de alta productividad carbonática y restricción de terrígenos. Flujos de fondo de baja energía inducidos por tormentas transportaron bioclastos desde áreas más proximales. Se documentan sustancias extracelulares poliméricas y microestructuras filamentosas. Se infieren aguas de fondo deficientes en oxígeno y niveles de oxígeno fluctuantes en la interfase agua-sedimento. Las corrientes de fondo pudieron haber transportado a los ofiuroideos por una distancia relativamente corta desde su hábitat. Allí, el descenso en el contenido de oxígeno podría explicar la muerte y preservación de restos articulados y, junto con la ausencia de procesos de alta energía y un sustrato cohesivo (rico en EPS) pudieron haber retrasado la desarticulación.; Recently, the first articulated ophiuroid remains in the Mesozoic of South America were found in Neuquén basin. Here, their paleoenvironmental setting is interpreted as a low-energy outer ramp setting below the storm wave base, deposited in a period ofhigh carbonate productivity and restricted terrigenous input. Weak storm-derived bottom flows carried bioclasts from more proximal areas. Extracellular polymeric substances and filament-like microstructures are documented. Oxygen-deficient bottom waters and fluctuating oxygen levels at the sediment-water interface are envisaged. The bottom flows might have transported the ophiuroids for a relatively short distance from their life habitat. In the new setting, a drop in the oxygen con - tent might explain their death and preservation of articulated remains. This together with the lack of high energy processes and a cohesive substrate (rich in EPS) could have delayed disarticulation.
</description>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/190351</guid>
<dc:description>Recientemente, se halló el primer registro de ofiuroideos articulados del Mesozoico de Sudamérica en Cuenca Neuquina. Aquí, se interpreta su paleoambiente depositacional como rampa externa de baja energía por debajo de la base de olas de tormenta, asociado a un periodo de alta productividad carbonática y restricción de terrígenos. Flujos de fondo de baja energía inducidos por tormentas transportaron bioclastos desde áreas más proximales. Se documentan sustancias extracelulares poliméricas y microestructuras filamentosas. Se infieren aguas de fondo deficientes en oxígeno y niveles de oxígeno fluctuantes en la interfase agua-sedimento. Las corrientes de fondo pudieron haber transportado a los ofiuroideos por una distancia relativamente corta desde su hábitat. Allí, el descenso en el contenido de oxígeno podría explicar la muerte y preservación de restos articulados y, junto con la ausencia de procesos de alta energía y un sustrato cohesivo (rico en EPS) pudieron haber retrasado la desarticulación.

Recently, the first articulated ophiuroid remains in the Mesozoic of South America were found in Neuquén basin. Here, their paleoenvironmental setting is interpreted as a low-energy outer ramp setting below the storm wave base, deposited in a period ofhigh carbonate productivity and restricted terrigenous input. Weak storm-derived bottom flows carried bioclasts from more proximal areas. Extracellular polymeric substances and filament-like microstructures are documented. Oxygen-deficient bottom waters and fluctuating oxygen levels at the sediment-water interface are envisaged. The bottom flows might have transported the ophiuroids for a relatively short distance from their life habitat. In the new setting, a drop in the oxygen con - tent might explain their death and preservation of articulated remains. This together with the lack of high energy processes and a cohesive substrate (rich in EPS) could have delayed disarticulation.</dc:description>
</item>
<item>
<title>Jornadas del CETMIC 2025: libro de resúmenes</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/189315</link>
<description>Libro
Jornadas del CETMIC 2025 (UNLP, 28 de noviembre de 2025)
Mocciaro, Anabella; Richard, Diego; Sequeira, Melanie
El CETMIC es un Centro que realiza investigaciones científicas en el campo de los materiales cerámicos, refractarios y aplicaciones tecnológicas de arcillas, así como estudios tecnológicos para la industria. Los estudios cubren desde los aspectos geológicos y de caracterización de materias primas (arcillas, minerales en general) hasta la caracterización de los productos finales incluyendo los procesos de elaboración. Los estudios de las materias primas comprenden la caracterización mineralógica, fisicoquímica y aplicaciones tecnológicas destinadas a su uso industrial. Referente a la elaboración de productos cerámicos se estudia la formulación, mezclado, conformado, secado y calcinación de las piezas.&#13;
Los objetivos principales del CETMIC son la investigación y el desarrollo tecnológico de todo lo referente a los materiales cerámicos, refractarios y sus materias primas conexas, la transferencia de conocimiento al medio productivo y la formación de recursos humanos.&#13;
En el CETMIC, se llevan adelante tesis doctorales y de grado de distintas facultades de la UNLP, la UTN, UNSAM, UNA y la UBA. Conjuntamente, estudiantes avanzados de carreras de grado de estas universidades realizan estadías de colaboración en los diversos grupos de investigación como así también pasantías de entrenamiento en tareas científicas para estudiantes de escuelas técnicas.&#13;
Este encuentro tiene como objetivo generar un espacio de intercambio y diálogo entre quienes integran el CETMIC, compartiendo experiencias, proyectos, desarrollos, ideas y líneas de trabajo en curso, en sus diversas áreas de interés. La jornada busca ser un ámbito abierto y participativo, donde todos se sientan invitados a presentar y conocer lo que se está haciendo dentro del instituto, más allá del formato o etapa en que se encuentre cada trabajo.&#13;
Esperamos que esta instancia contribuya al fortalecimiento del trabajo en conjunto y al intercambio de miradas que enriquezcan nuestro centro. Agradecemos el apoyo de las Autoridades del CETMIC y la buena predisposición de los/as expositores y participantes.
</description>
<pubDate>Wed, 01 Jan 2025 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/189315</guid>
<dc:date>2025-01-01T00:00:00Z</dc:date>
<dc:description>El CETMIC es un Centro que realiza investigaciones científicas en el campo de los materiales cerámicos, refractarios y aplicaciones tecnológicas de arcillas, así como estudios tecnológicos para la industria. Los estudios cubren desde los aspectos geológicos y de caracterización de materias primas (arcillas, minerales en general) hasta la caracterización de los productos finales incluyendo los procesos de elaboración. Los estudios de las materias primas comprenden la caracterización mineralógica, fisicoquímica y aplicaciones tecnológicas destinadas a su uso industrial. Referente a la elaboración de productos cerámicos se estudia la formulación, mezclado, conformado, secado y calcinación de las piezas.&#13;
Los objetivos principales del CETMIC son la investigación y el desarrollo tecnológico de todo lo referente a los materiales cerámicos, refractarios y sus materias primas conexas, la transferencia de conocimiento al medio productivo y la formación de recursos humanos.&#13;
En el CETMIC, se llevan adelante tesis doctorales y de grado de distintas facultades de la UNLP, la UTN, UNSAM, UNA y la UBA. Conjuntamente, estudiantes avanzados de carreras de grado de estas universidades realizan estadías de colaboración en los diversos grupos de investigación como así también pasantías de entrenamiento en tareas científicas para estudiantes de escuelas técnicas.&#13;
Este encuentro tiene como objetivo generar un espacio de intercambio y diálogo entre quienes integran el CETMIC, compartiendo experiencias, proyectos, desarrollos, ideas y líneas de trabajo en curso, en sus diversas áreas de interés. La jornada busca ser un ámbito abierto y participativo, donde todos se sientan invitados a presentar y conocer lo que se está haciendo dentro del instituto, más allá del formato o etapa en que se encuentre cada trabajo.&#13;
Esperamos que esta instancia contribuya al fortalecimiento del trabajo en conjunto y al intercambio de miradas que enriquezcan nuestro centro. Agradecemos el apoyo de las Autoridades del CETMIC y la buena predisposición de los/as expositores y participantes.</dc:description>
</item>
<item>
<title>Comportamiento coloidal y reológico de suspensiones acuosas de metazirconato de litio monoclínico</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/184194</link>
<description>Objeto de conferencia
XX Congreso Internacional de Metalurgia y Materiales (SAM-CONAMET) (Mar del Plata, 2 al 6 de mayo de 2022); Libro de resúmenes extendidos del 20º Congreso Internacional de Metalurgia y Materiales SAM-CONAMET 2022
El metazirconato de litio monoclínico (m-Li₂ ZrO₃ ) es un material cerámico con múltiples aplicaciones energéticas y podría cumplir un rol fundamental en el camino hacia una matriz energética sin emisiones de CO₂. Entre sus usos más estudiados en la actualidad, este material  ha sido implementado como nano-recubrimiento de electrodos y electrolitos sólidos, tanto en baterías de ion-Li como en baterías de Li de estado sólido. El m-Li₂ ZrO₃ podría mitigar la generación de interfases resistivas entre los electrodos y el electrolito, reducir la formación de dendritas anódicas, aumentar la ciclabilidad de la batería y mejorar su rendimiento electroquímico. El objetivo de este trabajo fue estudiar el comportamiento coloidal de suspensiones acuosas de m-Li₂ ZrO₃ preparadas mediante un tratamiento mecánico de alta energía, para obtener piezas de elevada densidad mediante la técnica de colado en moldes de yeso (slip casting).
</description>
<pubDate>Sat, 01 Jan 2022 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/184194</guid>
<dc:date>2022-01-01T00:00:00Z</dc:date>
<dc:description>El metazirconato de litio monoclínico (m-Li₂ ZrO₃ ) es un material cerámico con múltiples aplicaciones energéticas y podría cumplir un rol fundamental en el camino hacia una matriz energética sin emisiones de CO₂. Entre sus usos más estudiados en la actualidad, este material  ha sido implementado como nano-recubrimiento de electrodos y electrolitos sólidos, tanto en baterías de ion-Li como en baterías de Li de estado sólido. El m-Li₂ ZrO₃ podría mitigar la generación de interfases resistivas entre los electrodos y el electrolito, reducir la formación de dendritas anódicas, aumentar la ciclabilidad de la batería y mejorar su rendimiento electroquímico. El objetivo de este trabajo fue estudiar el comportamiento coloidal de suspensiones acuosas de m-Li₂ ZrO₃ preparadas mediante un tratamiento mecánico de alta energía, para obtener piezas de elevada densidad mediante la técnica de colado en moldes de yeso (slip casting).</dc:description>
</item>
<item>
<title>Prácticas prehispánicas de producción alfarera en el sitio Los Tres Cerros 2 (departamento Victoria, Entre Ríos)</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/184028</link>
<description>Objeto de conferencia
XXI Congreso Nacional de Arqueología Argentina (Corrientes, 10 al 14 de julio de 2023); Libro de resúmenes XXI Congreso Nacional de Arqueología Argentina
La localidad arqueológica Los Tres Cerros (LTC) se encuentra ubicada en la isla Las Moras, Delta Superior del río Paraná, y está integrada por tres estructuras monticulares que comenzaron a ocuparse hace aproximadamente 1460 años AP. Hasta el momento, el sitio mejor conocido de la localidad es el montículo central de mayores dimensiones (LTC1) en el que se han desarrollado estudios geoarqueológicos, radiocarbónicos, arqueofaunísticos, bioarqueológicos, arqueobotánicos, líticos y cerámicos. A partir de estos últimos, se han caracterizado las diferentes etapas del proceso de elaboración de la alfarería, principalmente la selección y preparación de las materias primas minerales y las condiciones de cocción.
</description>
<pubDate>Sun, 01 Jan 2023 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/184028</guid>
<dc:date>2023-01-01T00:00:00Z</dc:date>
<dc:description>La localidad arqueológica Los Tres Cerros (LTC) se encuentra ubicada en la isla Las Moras, Delta Superior del río Paraná, y está integrada por tres estructuras monticulares que comenzaron a ocuparse hace aproximadamente 1460 años AP. Hasta el momento, el sitio mejor conocido de la localidad es el montículo central de mayores dimensiones (LTC1) en el que se han desarrollado estudios geoarqueológicos, radiocarbónicos, arqueofaunísticos, bioarqueológicos, arqueobotánicos, líticos y cerámicos. A partir de estos últimos, se han caracterizado las diferentes etapas del proceso de elaboración de la alfarería, principalmente la selección y preparación de las materias primas minerales y las condiciones de cocción.</dc:description>
</item>
<item>
<title>Dehydroxylation of Kaolinite: Evaluation of Activation Energy by Thermogravimetric Analysis and Density Functional Theory Insights</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/181986</link>
<description>Articulo
Minerals; vol. 15, no. 6
Abstract: During the thermal treatment of kaolinite, the main mineral phase in kaolin rock, dehydroxylation occurs, forming metakaolin through a process that has significant industrial applications. This study experimentally analyzed dehydroxylation in two kaolinite samples: a well-crystallized reference sample from the Clay Mineral Society and a locally sourced, industrial kaolin sample. The mechanism and kinetic parameters were evaluated from a series of thermogravimetric measurements. Non-isothermal kinetic analysis revealed that dehydroxylation followed a third-order (F3) reaction mechanism, with activation energies (Ea) ranging from 35 to 60 kcal/mol. Additionally, theoretical calculations based on Density Functional Theory were performed on four systems in which a water molecule was removed by combining OH group and H atom vacancies in the kaolinite unit cell. These models represented the onset of dehydroxylation and provided values for the reaction energy Q from first-principles calculations, which served as reference values for Ea. The results confirm that water molecule formation involving both OH at the kaolinite outer surface and inner surface are energetically competitive and highlight the crucial role of structural relaxations following water removal to determine Q values in the range of 30–50 kcal/mol, in very good agreement with the experiments.
</description>
<pubDate>Sun, 01 Jun 2025 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/181986</guid>
<dc:date>2025-06-01T00:00:00Z</dc:date>
<dc:description>Abstract: During the thermal treatment of kaolinite, the main mineral phase in kaolin rock, dehydroxylation occurs, forming metakaolin through a process that has significant industrial applications. This study experimentally analyzed dehydroxylation in two kaolinite samples: a well-crystallized reference sample from the Clay Mineral Society and a locally sourced, industrial kaolin sample. The mechanism and kinetic parameters were evaluated from a series of thermogravimetric measurements. Non-isothermal kinetic analysis revealed that dehydroxylation followed a third-order (F3) reaction mechanism, with activation energies (Ea) ranging from 35 to 60 kcal/mol. Additionally, theoretical calculations based on Density Functional Theory were performed on four systems in which a water molecule was removed by combining OH group and H atom vacancies in the kaolinite unit cell. These models represented the onset of dehydroxylation and provided values for the reaction energy Q from first-principles calculations, which served as reference values for Ea. The results confirm that water molecule formation involving both OH at the kaolinite outer surface and inner surface are energetically competitive and highlight the crucial role of structural relaxations following water removal to determine Q values in the range of 30–50 kcal/mol, in very good agreement with the experiments.</dc:description>
</item>
<item>
<title>Aqueous tape casting of titanium-doped lithium metazirconate (Ti-Li₂ZrO₃) sheets for solid-state electrolyte applications</title>
<link>http://sedici.unlp.edu.ar:80/handle/10915/181855</link>
<description>Articulo
Open Ceramics; vol. 21
Ti-doped lithium zirconate (LZTO) sheets were successfully made by aqueous tape casting, by starting from an innovative colloidal synthesis route and optimizing the colloidal processing parameters. Zeta potential and particles size measurements, together with rheological characterization, were performed to adjust the slip composition. Then, the suspension with 1.0 wt% of ammonium polyacrylate dispersant (APA) and solid loading of 31 vol.% resulted in flat and flexible sheets, thinner than 450 μm, by adding 20 wt% of acrylic binder emulsion. After annealing at 1150 ◦C/15 h, LZTO sheets densified up to 85.5 %, presented a microstructure with grains of 6.4 μm in diameter, and exhibited electrical conductivity values in the order of 10⁻⁷, 10⁻⁶ and 10⁻⁵ S⋅cm⁻¹ at 350, 450 and 600 ◦C, respectively. Besides, XRD phase analysis revealed monoclinic Li₂ZrO₃ and minor ZrO₂ impurities originated from Li₂O volatilization during sintering, but no sign of TiO₂ segregation, indicating the formation of Li₂Zr₁-ₓTiₓO₃ solid solution.
</description>
<pubDate>Sat, 01 Mar 2025 00:00:00 GMT</pubDate>
<guid isPermaLink="false">http://sedici.unlp.edu.ar:80/handle/10915/181855</guid>
<dc:date>2025-03-01T00:00:00Z</dc:date>
<dc:description>Ti-doped lithium zirconate (LZTO) sheets were successfully made by aqueous tape casting, by starting from an innovative colloidal synthesis route and optimizing the colloidal processing parameters. Zeta potential and particles size measurements, together with rheological characterization, were performed to adjust the slip composition. Then, the suspension with 1.0 wt% of ammonium polyacrylate dispersant (APA) and solid loading of 31 vol.% resulted in flat and flexible sheets, thinner than 450 μm, by adding 20 wt% of acrylic binder emulsion. After annealing at 1150 ◦C/15 h, LZTO sheets densified up to 85.5 %, presented a microstructure with grains of 6.4 μm in diameter, and exhibited electrical conductivity values in the order of 10⁻⁷, 10⁻⁶ and 10⁻⁵ S⋅cm⁻¹ at 350, 450 and 600 ◦C, respectively. Besides, XRD phase analysis revealed monoclinic Li₂ZrO₃ and minor ZrO₂ impurities originated from Li₂O volatilization during sintering, but no sign of TiO₂ segregation, indicating the formation of Li₂Zr₁-ₓTiₓO₃ solid solution.</dc:description>
</item>
</channel>
</rss>
