Subir material

Suba sus trabajos a SEDICI, para mejorar notoriamente su visibilidad e impacto

 

Mostrar el registro sencillo del ítem

dc.date.accessioned 2019-11-15T13:06:44Z
dc.date.available 2019-11-15T13:06:44Z
dc.date.issued 2000
dc.identifier.uri http://sedici.unlp.edu.ar/handle/10915/85662
dc.description.abstract Se presenta el diseño y la experimentación de un prototipo de acumulador de calor a utilizar como parte de un sistema de acondicionamiento térmico de un invernadero hidropónico. Básicamente, el conjunto acumula calor durante el día tomando el aire que se calienta durante el día en el propio invernadero y lo devuelve a la noche para mantener la temperatura del local. El sistema consta de acumuladores formados por paquetes de botellas de agua colocados en un recinto. Mediante ventiladores y ductos el aire circula entre las botellas transmitiendo el calor transportado a través de la pared del recipiente. Los acumuladores en el interior del invernadero se arman sobre el piso con una altura de 0,50 m y 1 m de ancho sirviendo como soporte para las piletas de cultivo. Para caracterizar el acumulador se construyó un prototipo a escala y luego se armó un invernadero a escala real con un área de suelo de 100 m2, nueve piletas hidropónicas y sus correspondientes acumuladores. Se presentan las experiencias realizados sobre uno de los acumuladores y se determinan los parámetros térmicos de funcionamiento. es
dc.description.abstract A Water storage made with used PET bottles is studied as a part of a hydroponic greenhouse heating and cooling system. The storage is heated during the day using the hot air from the greenhouse and the heat is returned to the system during the night to keep the temperature at an appropiate value. The storage is made with 2.25 l plastic bottles filled with water, packaged and placed in an enclosure below the hydroponic table. An axial fan moves the air through the enclosure exchanging heat with the water in the bottles. A 100 m2 greenhouse containing nine storage units was built and one of them has been measured under real conditions in a charge-discharge daily cycle using different air flows. A computer simulation of the system was run determining the main thermal parameters by comparison with the experimental results. en
dc.format.extent 7-12 es
dc.language es es
dc.subject acumulador de agua es
dc.subject Invernaderos es
dc.subject botellas de PET es
dc.title Acumulador de agua para climatización de invernaderos armado con botellas de PET es
dc.title.alternative Water storage made with plastic bottles for greenhouse heating and cooling en
dc.type Articulo es
sedici.identifier.issn 0329-5184 es
sedici.creator.person Saravia Mathon, Luis Roberto es
sedici.creator.person Echazú, Ricardo Daniel es
sedici.creator.person Quiroga, Mirta Adriana es
sedici.creator.person Robredo, Patricia es
sedici.description.note Tema 2: Energía solar, aplicaciones agrícolas e industriales. es
sedici.subject.materias Ciencias Exactas es
sedici.subject.materias Ingeniería es
sedici.description.fulltext true es
mods.originInfo.place Asociación Argentina de Energías Renovables y Medio Ambiente (ASADES) es
sedici.subtype Articulo es
sedici.rights.license Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
sedici.rights.uri http://creativecommons.org/licenses/by-nc-nd/4.0/
sedici.description.peerReview peer-review es
sedici.relation.journalTitle Avances en Energías Renovables y Medio Ambiente es
sedici.relation.journalVolumeAndIssue vol. 4 es


Descargar archivos

Este ítem aparece en la(s) siguiente(s) colección(ones)

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) Excepto donde se diga explícitamente, este item se publica bajo la siguiente licencia Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)